SlotForum banner
1 - 3 of 3 Posts

· David Farrow
Joined
·
1,274 Posts
Hi Guys

Paint we need paint. I dont know what you want to paint the Scalex track with but it needs to be got! It was Portland gray sandtex some 10 15 years ago and that is not avalable now. Can we come up with what is wanted and can some one get it. I was hoping t get there today but it looks like I will be there tomorrow. Mick K is doing the bridge section and taking care of the supports of the banking, he can do with a helper but he runs at his own pace so he can be left to get on with that bit. The rest of the track can be worked on by a team of others.

Just so the work can move on a pace the next bits that must be done in ordre are:-

Fill the last few scerw holes and sand down, the track must be smooth before we cut any slots.

Cut the slots in the new bits.

Run the 3mm bit around all the slots.

Run the recess bit around all the slots.

Prime the recess

Paint the track

Glue down the braid
 

· David Farrow
Joined
·
1,274 Posts
Mick

Are you demanding running the router round the slots to clean them out must be done with a radius bar and guides!!!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top