SlotForum banner

Rockingham July 27-28: GT3 and WEC Digital Racing

16477 Views 124 Replies 24 Participants Last post by  GRUNZ
4
Rockingham July 27-28: GT3 and WEC Digital Racing

For the 3rd time Rockingham (www.rockinghamslotcarclub.co.uk) will host a double header of DiSCA GT3 and WEC events on Rockbull Ring ninco track at the National Slot Car Centre on the weekend of 27th and 28th July 2019.



The club is located at:

Unit 1, Wansell Road, Corby NN17 5LX

https://www.bing.com/maps?q=rockingham+slot+car&src=IE-TopResult&FORM=IETR02&conversationid=



The event will feature a double feature with GT3 racing on the Saturday and the Rockbull Ring 6hrs WEC endurance on Sunday.

We welcome all comers to the event, whether you partake in either or both days. Rockingham can provide technical assistance and has several Slot.it controllers available, should new teams require them.

With free practice staring on Friday afternoon there will be plenty of time for teams to check out the track and set-up

Rockbull Ring 90 min GT3 Sprint Races, Saturday 27 July
As in 2018 the DiSCA GT3 cars with teams of either two or three drivers, will kick off the event on Saturday from 08:00 till 15:00hrs.

There will be one 60 min. Timed Practice session and two 90 min. races which include one mandatory pitstop of 1 minute duration.

Full Disca GT3 rules will apply for the Rockbull Ring GT3 race. No handout parts (although some will be available to purchase if required). You must ensure the 1.8mm motor ride height is achieved at tech inspection before both races.

Rockbull Ring 6hrs WEC, Sunday 28 July



With the Rockbull Ring 6rs run under the same DiSCA WEC Sports Cars rules as used for the Oxigen LM 24hrs, and with its long straights flowing techincal areas the track has significant similarities to the Henley track. As the track is only set-up for these events there is no real local track advantage making it a very open competition.

WEC 6hrs hand out materials
Teams will be hand out 1 motor at random (Flat-6 or MX-16) These motors have been tested, matched and run in by Slot.it. Should in the unlikely occasion a motor be defective, teams will receive a new one from the organisation.

Teams will be hand out 2 pairs of N18 and 1 pair of F22 at random. Both compounds must be used during the main race. Hand outs will be available on Saturday after registering at the race control.

During free practice teams are free to run their own motors and tyres (of the same type and or compound), we advise teams to mount their handouts before the end of free practice. This way you'll be able to hit the ground running on Sunday morning. If you use this option you will have to place the parts in the Parc Ferme overnight (along with the whole car, chassis, pod with motor rear axle and wheels)

Rockbull Ring Double Digital Time Table

Friday 26 July 2019
14:00 - 22:00 Free Practice WEC & GT3, firmware check

Saturday 27 July 2019: DiSCA GT3 / WEC 6hrs Free Practice
DiSCA GT3 Sprint races
08:00 Doors open, firmware check
09:00 Driver's briefing.
09:15 Registration Controller & ID check.
09:30 Timed Practice (60 mins)
10:35 Tech inspection and Rostrum position choice based on best time from timed practice.
10.55 Line up Grid Race 1
11.00 Start Race 1 (90 mins)
12.30 Intermission
13:00 Tech inspection Race 2
13:25 Line up Grid Race 2
13.30 Start Race 2 (90 mins)

WEC 6hrs Practice
15:00 - 19:00 Free practice/ Registration/ Hand out materials, controller/chip check & pairing
(note: handout parts must be back in the Parc Fermé by 19:15)
19:15 Close Club
19:30 - 22:00 Diner & Award ceremony GT3

Sunday 28 July 2019, WEC 6 hrs Endurance
08:00 - 09:00 Free Practice for teams that did not participate in Saturday's WEC Practice session
Hand out race motor & tyres, controller/chip check & pairing
Release cars/parts from Parc ferme. of teams that attended Saturday's WEC Practice session
09:05 - 09:15 Race briefing
09:20 - 11:00 Timed Qualification & Technical Inspection
11:05 - 11:20 Concourse & Team photo's, Driver Rostrum selection based on qualification result.
11:20 - 11:25 Grid formation
11:30 - 17:30 WEC Rockbull Ring 6 hrs Endurance
17:45 - 18:00 Award ceremony .

Entries & Registration:
The registration for the 2019 event are open now. Teams that want to enter this event need to apply via the online entry forms:

Saturday 27th July GT3 Race:

https://docs.google.com/forms/d/16Lgr-sfSLawU9k0D_JuzmEnmIZ7XBWqhwWXjAGQ_zZo/viewform?chromeless=1&edit_requested=true

Sunday 28th July 6hr WEC race:

https://docs.google.com/forms/d/e/1FAIpQLSeAtYO4lz8hirQVyrlVWKN-1A6a_Qek2v1h_NO4IbWQ_4lEGg/viewform

The first 16 teams that fully pay their entry will secure their place for both or either the Saturday GT3 and the Sunday 6hrs WEC race. Past participation does not guarantee a place.

Entry fees will be £70 per team the WEC race and £20 per team for the GT3 race.

Final instructions, including the final entry list, firmware for chip and controller, and any travel considerations will be issued to team captains in early July.

I will be more than happy to answer any queries here on the forum or via PM.

You can also follow the developments for the Rockingham Double Digital event via the Rockingham Slot Car Club facebook page

thanks

Matt

Attachments

See less See more
  • Like
Reactions: 1
1 - 1 of 125 Posts
Is it possible to have too strong a magnetic field?

Large, super powerful neo magnets are available on eBay for pennies, I use dozens of them in my studio, and would prefer to re-purpose some of those rather than buying more of the fragile and brittle CN11/CN01.
1 - 1 of 125 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top