SlotForum banner

Rockingham July 27-28: GT3 and WEC Digital Racing

16460 Views 124 Replies 24 Participants Last post by  GRUNZ
4
Rockingham July 27-28: GT3 and WEC Digital Racing

For the 3rd time Rockingham (www.rockinghamslotcarclub.co.uk) will host a double header of DiSCA GT3 and WEC events on Rockbull Ring ninco track at the National Slot Car Centre on the weekend of 27th and 28th July 2019.



The club is located at:

Unit 1, Wansell Road, Corby NN17 5LX

https://www.bing.com/maps?q=rockingham+slot+car&src=IE-TopResult&FORM=IETR02&conversationid=



The event will feature a double feature with GT3 racing on the Saturday and the Rockbull Ring 6hrs WEC endurance on Sunday.

We welcome all comers to the event, whether you partake in either or both days. Rockingham can provide technical assistance and has several Slot.it controllers available, should new teams require them.

With free practice staring on Friday afternoon there will be plenty of time for teams to check out the track and set-up

Rockbull Ring 90 min GT3 Sprint Races, Saturday 27 July
As in 2018 the DiSCA GT3 cars with teams of either two or three drivers, will kick off the event on Saturday from 08:00 till 15:00hrs.

There will be one 60 min. Timed Practice session and two 90 min. races which include one mandatory pitstop of 1 minute duration.

Full Disca GT3 rules will apply for the Rockbull Ring GT3 race. No handout parts (although some will be available to purchase if required). You must ensure the 1.8mm motor ride height is achieved at tech inspection before both races.

Rockbull Ring 6hrs WEC, Sunday 28 July



With the Rockbull Ring 6rs run under the same DiSCA WEC Sports Cars rules as used for the Oxigen LM 24hrs, and with its long straights flowing techincal areas the track has significant similarities to the Henley track. As the track is only set-up for these events there is no real local track advantage making it a very open competition.

WEC 6hrs hand out materials
Teams will be hand out 1 motor at random (Flat-6 or MX-16) These motors have been tested, matched and run in by Slot.it. Should in the unlikely occasion a motor be defective, teams will receive a new one from the organisation.

Teams will be hand out 2 pairs of N18 and 1 pair of F22 at random. Both compounds must be used during the main race. Hand outs will be available on Saturday after registering at the race control.

During free practice teams are free to run their own motors and tyres (of the same type and or compound), we advise teams to mount their handouts before the end of free practice. This way you'll be able to hit the ground running on Sunday morning. If you use this option you will have to place the parts in the Parc Ferme overnight (along with the whole car, chassis, pod with motor rear axle and wheels)

Rockbull Ring Double Digital Time Table

Friday 26 July 2019
14:00 - 22:00 Free Practice WEC & GT3, firmware check

Saturday 27 July 2019: DiSCA GT3 / WEC 6hrs Free Practice
DiSCA GT3 Sprint races
08:00 Doors open, firmware check
09:00 Driver's briefing.
09:15 Registration Controller & ID check.
09:30 Timed Practice (60 mins)
10:35 Tech inspection and Rostrum position choice based on best time from timed practice.
10.55 Line up Grid Race 1
11.00 Start Race 1 (90 mins)
12.30 Intermission
13:00 Tech inspection Race 2
13:25 Line up Grid Race 2
13.30 Start Race 2 (90 mins)

WEC 6hrs Practice
15:00 - 19:00 Free practice/ Registration/ Hand out materials, controller/chip check & pairing
(note: handout parts must be back in the Parc Fermé by 19:15)
19:15 Close Club
19:30 - 22:00 Diner & Award ceremony GT3

Sunday 28 July 2019, WEC 6 hrs Endurance
08:00 - 09:00 Free Practice for teams that did not participate in Saturday's WEC Practice session
Hand out race motor & tyres, controller/chip check & pairing
Release cars/parts from Parc ferme. of teams that attended Saturday's WEC Practice session
09:05 - 09:15 Race briefing
09:20 - 11:00 Timed Qualification & Technical Inspection
11:05 - 11:20 Concourse & Team photo's, Driver Rostrum selection based on qualification result.
11:20 - 11:25 Grid formation
11:30 - 17:30 WEC Rockbull Ring 6 hrs Endurance
17:45 - 18:00 Award ceremony .

Entries & Registration:
The registration for the 2019 event are open now. Teams that want to enter this event need to apply via the online entry forms:

Saturday 27th July GT3 Race:

https://docs.google.com/forms/d/16Lgr-sfSLawU9k0D_JuzmEnmIZ7XBWqhwWXjAGQ_zZo/viewform?chromeless=1&edit_requested=true

Sunday 28th July 6hr WEC race:

https://docs.google.com/forms/d/e/1FAIpQLSeAtYO4lz8hirQVyrlVWKN-1A6a_Qek2v1h_NO4IbWQ_4lEGg/viewform

The first 16 teams that fully pay their entry will secure their place for both or either the Saturday GT3 and the Sunday 6hrs WEC race. Past participation does not guarantee a place.

Entry fees will be £70 per team the WEC race and £20 per team for the GT3 race.

Final instructions, including the final entry list, firmware for chip and controller, and any travel considerations will be issued to team captains in early July.

I will be more than happy to answer any queries here on the forum or via PM.

You can also follow the developments for the Rockingham Double Digital event via the Rockingham Slot Car Club facebook page

thanks

Matt

Attachments

See less See more
  • Like
Reactions: 1
61 - 80 of 125 Posts
2
Updated entry details with change of identification numbers to ensure we have the correct sticker numbers/colours available. As a result I have changed the GT3 id numbers to coincide to ease teams programming hassles.

The hand controller firmware will be 3.04

The in-car firmware will be as follows:

• 2.13 for Type A or Type B

• 3.01 for Type B1

• 3.03 for Type B2 and Type C

Attachments

See less See more
  • Like
Reactions: 1
Last call for dinner - Underwood has called dibs on Chinese so will search out an appropriate venue

Dinner Sat 27th July

Dave Maddock

Mrs Maddock

John Bailey

Christine Bailey

Martyn Johns

Caroline Johns

Matt Tucker

John Underwood

Phil Field

Lewis Gough

Leon Gibbons

Craig Jones
See less See more
If anyone wishes to buy a 1.8mm ground clearance shim for checking GT3 cars I will have some for sale, they will be £4 each. Sorry if the seems a touch steep but that's what they cost.
  • Like
Reactions: 2
Confirmed 3rd driver for team "The gas monkeys" is Mark Long of the Nascot Wood club.
Graham and I will be there for Friday practice.
Alan W
Dinner Sat 27th July

Dave Maddock

Mrs Maddock

John Bailey

Christine Bailey

Martyn Johns

Caroline Johns

Matt Tucker

John Underwood

Phil Field

Lewis Gough

Leon Gibbons

Craig Jones

Nick Wade

Keith Fishenden

Jon White
See less See more
LMP, I would like to by one of your 1,8s
  • Like
Reactions: 1
If anyone needs something from my website - www.svworkz.be -, let me know and I'll bring it to Rockingham
smile.png
See less See more
If anyone needs something from my website - www.svworkz.be -, let me know and I'll bring it to Rockingham :)
I know Sean has requested on of your tyre jigs.

Re darkness. Nick, John and I agreed it would be good to run a propn of the 6hr in the dark. We will test the lighting situation and ensure the conditions are suitable and if so run the last 60-90mins in those conditions.

Matt
  • Like
Reactions: 2
Dinner Sat 27th July[/size]

Dave Maddock[/size]
Mrs Maddock[/size]
John Bailey[/size]
Christine Bailey[/size]
Martyn Johns[/size]
Caroline Johns[/size]
Matt Tucker[/size]
John Underwood[/size]
Phil Field [/size]
Lewis Gough[/size]
Leon Gibbons[/size]
Craig Jones[/size]
Nick Wade[/size]
Keith Fishenden[/size]
Jon White[/size]
Table booked for 20, so a couple of spaces available

Matt
Hi svworkz,

I'm interested in your tire saucer. Bring one, show me how big it is and how well it works. If it suits my needs, I'll buy it. Looking forward seeing your tire saucer, at work …….. and you racing :)

JohnNy
  • Like
Reactions: 1
Anyone partaking in the Friday practice will have the opportunity to partake in our club racing if they wish. Chance to be immortalised in our mythical Hall of Fame if you take the win. We are racing Group 5 cars or for newcomers anything goes. So cars available or if you bring your own I have wheels/tyres to suit.

Matt
  • Like
Reactions: 1
If anyone needs something from my website
Hello mate, I'd like four packs of the SVSCR010 spring retainer nuts please.

And I can highly recommend the tyre saucer (this puppy) , it's a very convenient unit for prepping tyres.

Re darkness. Nick, John and I agreed it would be good to run a propn of the 6hr in the dark. We will test the lighting situation and ensure the conditions are suitable and if so run the last 60-90mins in those conditions.

Matt
Great news
thumbsup.gif
See less See more
  • Like
Reactions: 1
If anyone needs something from my website - www.svworkz.be -, let me know and I'll bring it to Rockingham
smile.png
Two sets of your decals please Steven, for the Zeod.
  • Like
Reactions: 1
Ok, thanks everyone. Everything is noted. I'll leave Tom at home and bring my inventory!
lmfao.gif
See less See more
  • Like
Reactions: 1
Haha, since you now have more room, can I also have a radical.😄
  • Like
Reactions: 1
2
Haha, since you now have more room, can I also have a radical.
No problem! :)

An Oreca 07 please
dribble.gif
biggrin.png
banana.gif
Which one do you prefer? Prototype 1, 1.2 , 1.5 , 2.1 or 2.5 ?
dribble.gif


You'll still have to wait a bit of time. But i'll bring one version you all can touch, lick or or do whatever you want!
tongue.png
See less See more
2
Gentlemen, here is a preview of your spotters guide for Sunday's RockBull Ring 6h, 2 round in the WEC European Championship
smile.png


Tire Wheel Motor vehicle Automotive tire Vehicle

Attachments

See less See more
  • Like
Reactions: 3
Much appreciated Gary, an excellent part of what makes the DiSCA events special.

Just to get you all in the mood (what mood will be very personal to you) - Nick Wade and I are setting up the track and room tomorrow in what is likely to be 35 degree heat. Mankinis will be needed.

Luckily Friday and the weekend will be cooler at mid 25's.

Matt
61 - 80 of 125 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top