SlotForum banner

Scalex TVR

3927 Views 27 Replies 10 Participants Last post by  Intergrali
First off Thanks Adrian!

now having been told to almost completely nit pick the car, I have done so these are my findings!

First off, Congratulations on getting the guide to swivel more than 3 degrees without losing contact
However as usual, I have already thought that once the actual guide wears out not the braids and it is in the middle of an endurance race, what are you supposed to do exactly? you cant simply pull it out and replce with braids!! You have to remove the body, faff about with lots of fiddly screws, then unscrew the guide, then faff about putting it back together (I've found a way around this I will tell later! Now, a suggestion, use a guide like Ninco, simple but effective and K.I.S.S!!!

Now, moving onto screw points, the idea of having the guide screwed in is wonderful, congrats again, so maybe merge the ninco guide idea with the screw idea and oh whoops already have.. but thats for wood! why not do it for plastic tracks? I DARE you!

Now shuffling along, one thing that irritates the hell out of me is having stupidly short screws ie middle screws on CLK DTM scalex make, however the front and mid. screws on TVR are spot on, no need for huge dock off long ones at the back.. make them all the same size so screwing together doesnt involve swearing and going more insane than dancing in a pitch black room waiting for a film to develop (never again shall I do that!) incidentally I was on my own!

oh yes.. remember those mid mounted motors you used to have.. PLEASE PLEASE PLEASE go back to those I really wish you would! please mr scalextric! I've had enough of long drive shafts faffing about removing coupling springs and all that polava however at least I havnt managed to pop it out in the flyesq way!!

now rotating along the drive chain, we come the the power to track connection also known as the tyres! very nice and round and round and round oh and sticky too, please dont use sillycones next year please dont! Rubber is much better. also I like the smell of lighter fluid or WD40 on tyres

body work? very nice black is a wonderful colour (attracting all the finger print within a 50 mile radius!) also, please look at Ninco and make your mirrors removeable so that we dont smash them off while racing
would be much appreciated!
Also, movig onto how to get the guide off without unscrewing the body.. see the front part of the bonnet, push it out, now you have access to the guide and improved cooling
yes I did have to have an accident to discover this!
And the rear wing, I cant decide but the writing just doesnt look straight!! not far off but definately not straight!

Braids.. as usual copper please the steel coating wears off or stops them from performing at their maximum.

oh congrats on the solid front axle much appreciated again, but cant we have the sport axles at least?

last but not least, can you stop covering over the gears? it's much easier to oil them with the body on and with a hole where they protrude through the chassis also, whats with the lines on the chassis? cant it be nice and smooth?


p.s feel free to disagree but this what i found, please post what you think.. and help scalex become better

edit: rr3.9 just reminded me.. wires too stiff, use Fly wires the one good thing about their running gear!
See less See more
1 - 5 of 28 Posts

I don't hold with all this negativity.

Thing is, and this is the thing, I think after all of the above you are still a happy punter with your Trevor, aren't you?

I know after reading all you've put here I'm still sorely tempted to aquire one. And I HATE TVRs.

Tell me, does that front axle have any travel in it?
See less See more
Tsch, I thought it was just the Yanks that didn't get irony.

Try one? Well I keep bidding on Ebay and losing out. Soon, soon...
See less See more
QUOTE The 'R's on the bonnet are the bonnet clips

[West country accent]

See less See more
Mope, I think Inte's looking with a punter's eyes i.e. he's bought it and wants to give some feedback on areas that the car is failing in.

As the consumers we should not shy from voicing our opinions and dissatisfactions with any and every brand we find wanting.

There is no harm in expressing your contentment with what another perceives as a flawed product. Just as there is no harm whatsoever in having a contrary stance.
QUOTE Also, if you dont find flaws, you will never get any better! whats the saying, you learn from your mistakes.....

And Hornby have been learning. I'm quite sure they have been using the popular forums for research and taking it to the drawing board. For this I applaud them.

QUOTE The endurace racer may have a point but how many of them will be using a Scaley car...?

Nobody who wants to win uses 'em!

What does that tell us?

Next year? I doubt anyone will use 'em either. And frankly, I would be very happy to see them pass on taking on the likes of Slot It. The real money for Hornby is in the toy market. This is a company with shareholders, they gotta chase the profit every time.

Braids? I always found steel braids fell apart faster than copper.
See less See more
1 - 5 of 28 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.