SlotForum banner
1 - 3 of 3 Posts

· Registered
Joined
·
105 Posts
Well , Im definitely not an accomplished scratch builder
, but I did come up with this. Its a Scaly Caddy , with Slotit running gear, Pattos wheels and foam , 35000 Scaleauto motor. I needed to come up with a easier way than trying to fit a deep guide. Clear plastic cut from a Slotit package then siliconed to the guide , so far its got a couple hundred laps on a large high banked comm. raceway and it works great.

DE38






Personally I think wing car speed belongs on the big comm. tracks
 

· Registered
Joined
·
105 Posts
Hi Astro ,it works quite well, its a lot easier than trying to fit a Slotit or TSRF guide, they are great guides , but just require way too much modification to Scaly cars.
I held it together overnight with a pair of small vise grips and has stayed ever since


DE38


 

· Registered
Joined
·
105 Posts
QUOTE Doesn't it get bogged down on Radius 1 curves and hairpins?

Yes, it certainly would, but I worked the Caddy to be run strictly on a large comm. track , so far the guide has held up well, the tightest curve on this track is about the same as an SCX outer curve


DE38
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top