SlotForum banner
1 - 12 of 12 Posts

· Registered
Joined
·
198 Posts
Discussion Starter · #1 ·
I'm trying to find out if I can buy the borders and barriers that fit on the Scalextric digital pit-lane entrance/exit track sections C7014, the borders are a specific shape to fit the track.
I purchased the new pit-lane track sections C7014 but it was without any borders but was half price at £16, which seemed like a bargain price to me, I believe they are taken from split up boxed sets.

I'm not sure the borders can be purchased separately?. They are tan coloured and I need the 2 pieces for the left and right sides, and the barriers.

Anyone possibly know where I can obtain these or buy them, new or used.

Thankyou.
 

· Registered
Scalextric Arc Digital track just set up a track on 8ft x16ft table and approx 120ft track
Joined
·
29 Posts
Here’s one of mine that is mdf
Here’s one of mine that is mdf
Yes I have looked at E Bay and the price they wanted it would be almost cheaper to order a New pit from local Dealer in Toronto then sell the actual Pit. I like the MDF suggestion if all else fails I will look at this as a option Thank You for the Idea and reply here
 

· Registered
Scalextric Arc Digital track just set up a track on 8ft x16ft table and approx 120ft track
Joined
·
29 Posts
You can sort of make your own , it's been ages but from a fuzzy memory you can create them from R3 borders...maybe 🤔
I made the Pit Barriers here with Scroll saw but thanks to everyone who commented and advised
 

· Registered
Scalextric Arc Digital track just set up a track on 8ft x16ft table and approx 120ft track
Joined
·
29 Posts
I made the Pit Barriers here with Scroll saw but thanks to everyone who commented and advised
I made these up worked out pretty well Pressboard from HD and White on one side light Tan on back it matched up pretty close to actual barriers . Thanks Again for the suppgestion
 

Attachments

1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top