Chris,
I'd suggest two things:
1 - make sure the magnet is not loose in its cradle.
2 - lube the screw and all the pivot mechanism of the controller. It tends to stick but if you follow this advice
http://www.slot.it/Download/FAQ_PDF_en/15-StickySCP1.en.pdf
it will go away. Then, tighten the screw up. It is designed to work when tight - if you loosen it up, trigger position readouts become very unreliable, hence (possibly) your trouble.
Regards
Maurizio
I'd suggest two things:
1 - make sure the magnet is not loose in its cradle.
2 - lube the screw and all the pivot mechanism of the controller. It tends to stick but if you follow this advice
http://www.slot.it/Download/FAQ_PDF_en/15-StickySCP1.en.pdf
it will go away. Then, tighten the screw up. It is designed to work when tight - if you loosen it up, trigger position readouts become very unreliable, hence (possibly) your trouble.
Regards
Maurizio
