Screws????`
1 - 14 of 14 Posts
Joined
·
1,145 Posts
QUOTE (Saviour @ 8 Jan 2011, 23:11) <{POST_SNAPBACK}>So 31 (at this point in time) can view, but no one has an answer :-(
Oh, we can answer some questions, but this question is similar to the classic "How long is a piece of string?". Different slot cars have different size and length of screws, and some even have several different size screws in one car, like on Scalextric's Aston Martin DBR9.
Oh, we can answer some questions, but this question is similar to the classic "How long is a piece of string?". Different slot cars have different size and length of screws, and some even have several different size screws in one car, like on Scalextric's Aston Martin DBR9.
QUOTE (Keef921 @ 9 Jan 2011, 00:24) <{POST_SNAPBACK}>Hi Andy, sorry to sound thick but what do yo mean by PK screws.
Regards Keith
LOFL..
![]()
![]()
![]()
![]()
![]()
![]()
+ cut heads, like Philips, but not like them. self tapping. The screws that hold the chassis to the body. Be them Hornby, Slot.it, NSR, HPI, Pioneer, they are all abut the same size in dia. some are longer than others, but that is not down to one make. All use long and short at some point. 5.5mm to 9.5 long.
PK Screws, just cannot believe you have never heard of them, been around now since the early 70's. before that it was Philips, which are still used a lot in the wood working sheds of the UK. PK, mainly used for Plastic and Metal.
Now some is going to come back and tell us, NO, there not PK, there ............................................................
Andy
QUOTE Oh, we can answer some questions, but this question is similar to the classic "How long is a piece of string?". Different slot cars have different size and length of screws, and some even have several different size screws in one car, like on Scalextric's Aston Martin DBR9.
Yes, but, they are all around the same DIA. I think, 2.2mm. But try buying them. Cheapest I have found, £2.99 for 10, that's 29p each. £1 + per car. I'm sure I could buy them cheaper than that, Box of 100 for a fiver. If only I had the right DIA. Not bothered about the small counter sunk ones that screw into the inertia.
Regards Keith
LOFL..
PK Screws, just cannot believe you have never heard of them, been around now since the early 70's. before that it was Philips, which are still used a lot in the wood working sheds of the UK. PK, mainly used for Plastic and Metal.
Now some is going to come back and tell us, NO, there not PK, there ............................................................
Andy
QUOTE Oh, we can answer some questions, but this question is similar to the classic "How long is a piece of string?". Different slot cars have different size and length of screws, and some even have several different size screws in one car, like on Scalextric's Aston Martin DBR9.
Yes, but, they are all around the same DIA. I think, 2.2mm. But try buying them. Cheapest I have found, £2.99 for 10, that's 29p each. £1 + per car. I'm sure I could buy them cheaper than that, Box of 100 for a fiver. If only I had the right DIA. Not bothered about the small counter sunk ones that screw into the inertia.
Joined
·
1,145 Posts
Try Screwfix. There's a branch at Hedge End I believe.
Joined
·
184 Posts
Andy
Ah, PK - Parker-Kalon - used in aviation / sheet metal working. Never heard of them. Not sure any slot car makers use them.
Anyway as Pressbuttons says, diferent slot car manufacturers, different years, pozi drive, phillips, flat blade, metric, imperial etc - so many different combinations. You only have to look through my box of spare screws (or in the slots of Daves track) to see how many different types are used. Was there any particular cars you were referring to?
PS Happy Birthday by the way, hope you got what you wanted, if not hope you got some slot cars
![]()
Regards Keith
Ah, PK - Parker-Kalon - used in aviation / sheet metal working. Never heard of them. Not sure any slot car makers use them.
Anyway as Pressbuttons says, diferent slot car manufacturers, different years, pozi drive, phillips, flat blade, metric, imperial etc - so many different combinations. You only have to look through my box of spare screws (or in the slots of Daves track) to see how many different types are used. Was there any particular cars you were referring to?
PS Happy Birthday by the way, hope you got what you wanted, if not hope you got some slot cars
Regards Keith
Screw Fix, OK, I'll check them out.
Yes, I know there are lots of different types, but all basicly the same. Apart from fine thread. Most are course and around the 2mm mark. 2.3 at most.
I check out Screw Fix.
Cheers
Guys and thanks.
The smallest they do, Screwfix, is 3mm x 12 (imp 4 x1.5) To big.
OH Well...............
Yes, I know there are lots of different types, but all basicly the same. Apart from fine thread. Most are course and around the 2mm mark. 2.3 at most.
I check out Screw Fix.
Cheers
Guys and thanks.
The smallest they do, Screwfix, is 3mm x 12 (imp 4 x1.5) To big.
OH Well...............
Joined
·
1,145 Posts
I didn't bother with a Google search at first because I assumed that you would have done it yourself, but it seems you didn't think of that, or were waiting for one of us to do it for you.
I did, and the first result on the page came up with this:
#2 self-tapping screws
Can I go back to sleep now?
I did, and the first result on the page came up with this:
#2 self-tapping screws
Can I go back to sleep now?
QUOTE (pressbutton @ 9 Jan 2011, 16:06) <{POST_SNAPBACK}>I didn't bother with a Google search at first because I assumed that you would have done it yourself, but it seems you didn't think of that, or were waiting for one of us to do it for you.
I did, and the first result on the page came up with this:
#2 self-tapping screws
Can I go back to sleep now?
Thanks for this, 3000 = £33, 0.011p each.
No I did not do a search as I did not know what I was searching for, now that I do , 2.2mm dia, A2, M2 I will.
Thanks, and yes, you can go back to sleep now.
![]()
Cheers
Andy
I did, and the first result on the page came up with this:
#2 self-tapping screws
Can I go back to sleep now?
Thanks for this, 3000 = £33, 0.011p each.
No I did not do a search as I did not know what I was searching for, now that I do , 2.2mm dia, A2, M2 I will.
Thanks, and yes, you can go back to sleep now.
Cheers
Andy
QUOTE (Keef921 @ 9 Jan 2011, 21:57) <{POST_SNAPBACK}>Hi Andy - just thought that I'd wake Pressbutton up again
A few screws I know from my spares box are :-
Scalex 6mm / 8mm / 12mm X 2mm - Pozi
Scalex 6mm / 8mm / 12mm X2.3mm - Pozi
Ninco 9.5mm X 2.2mm
Ninco 6.5mm X 6.5mm
Keith
Ninco 6.5mm X 6.5mm ????
Make Dia Length COUNTERSUNK
Fly 2.13 8.00
HPI 2.23 6.45
Horn 2.25 9.50
Pion. 2.43 5.60 YES
AS I said, all around the 2.2 mark. It's the length. So if I can find 2.2mm, I should be able to find any length.
Andy
A few screws I know from my spares box are :-
Scalex 6mm / 8mm / 12mm X 2mm - Pozi
Scalex 6mm / 8mm / 12mm X2.3mm - Pozi
Ninco 9.5mm X 2.2mm
Ninco 6.5mm X 6.5mm
Keith
Ninco 6.5mm X 6.5mm ????
Make Dia Length COUNTERSUNK
Fly 2.13 8.00
HPI 2.23 6.45
Horn 2.25 9.50
Pion. 2.43 5.60 YES
AS I said, all around the 2.2 mark. It's the length. So if I can find 2.2mm, I should be able to find any length.
Andy
Joined
·
981 Posts
Try Squires in bognor regis, might help, then you can all go back to sleep! cheers steve
Joined
·
184 Posts
QUOTE (Saviour @ 9 Jan 2011, 22:42) <{POST_SNAPBACK}>Ninco 6.5mm X 6.5mm ????
Sorry Ninco 6.5mm X 2.2
Sorry Ninco 6.5mm X 2.2
1 - 14 of 14 Posts
