SlotForum banner
1 - 10 of 10 Posts

· Premium Member
Joined
·
429 Posts
FALCON Raceway SCX Nascar Endurance 10/5/12

15 minute heats

Name Heat 1 Heat 2 Heat 3 Heat 4 Totals

Lee 139.6 136.9 138 141.1 555.6

Martin 117.6 124.9 129.3 133.9 505.7

George 144.3 74.2* 143 142.9 504.4

Gary 145.5 141.2 38* 143.9 468.6

Steve 113.1 129.1 123.2 85+ 450.4

Michael 66* 146.2 135.9* 62* 410.1

+ car failure
* ran out of fuel

Positions per round

Round 1 Gary,George,Lee,Martin,Steve,Michael.

Round 2 Gary,Lee,Steve,Martin,George,Michael.

Round 3 Lee,Martin,Steve,George,Michael,Gary.

Round 4 Lee,Martin,George,Gary,Steve,Michael.

** Provisional Results - Stewards Report Not In Yet
 

· Registered
Joined
·
1,952 Posts
Lee,

I also ran out of Fuel in heat 3 with just about a minuet to go


On a side note from the race stewards I received this message:

"It later came to our attention that Mr Thorndike had applied a treatment to his tyres.

Therfore he will be stripped of his race meeting win and penalised 100 laps in the next SCX Endurance Metting"

The FALCON Raceway - Race Stewards
 

· Registered
Joined
·
317 Posts
A bent axle, eh? Well that explains why it was vibrating like it was running on 20p coins instead of tyres down the straights!

I reckon that's why I kept going off on the bends too!


Do you know if the axle was what ultimately caused the car to fail in the last race?

Anyhoo - really looking forward to this Thursday!

...and this, I believe, is my 200th post!
 

· Registered
Joined
·
1,952 Posts
Steve I think it was the NINCO Braids that Lee put on it.


They just couldn't make it thru the night, as they were worn out and all frayed

I did tell him to use some Slot.it ones, but I think he was desperate to get his 1st win on his own track
So nobbled you

After over a year of running on it, that was the 1st race night win he has had
 

· Premium Member
Joined
·
429 Posts
Discussion Starter · #10 ·
don't forget I have been preping your car to michael.
It runs real smooth now but seems to have no grip.

The car failed steve because the wires came out of the guide.
caused mainly by wrong braids and excessive crashing.
I have new braid now.
Remember slow and steady wins the race.

I have to win anyway i'm australian
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top