SlotForum banner
1 - 2 of 2 Posts

· Registered
Joined
·
211 Posts
Drummer

I have been running 50 laps test 2 cars that i have fitted digital chips into and these have a blue flag and worked fine.

Where did you read this in the manual.

I would assume on the elevate the LC, i think that they mean the LC only, if you evelate the senor track and LC then i can't see this as a problem.

Hope this helps

ScalextricRacer
 

· Registered
Joined
·
211 Posts
Guy's

Can someone explain where you are coming from with avoiding stray light under the senor track.

The senor itself is backed onto a PCB and the back of the PCB is covered by black plastic. if the senors where that sensitive then it would have to be used in a dark room, (this is not the case).

I would assume that they are staying not to elevate the LC track just incase the becomes bent, the slight degree and the LC flag would stick up more than the track thus deslotting your cars.

Hope this helps

ScalextricRacer
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top