SlotForum banner

SLC track section

841 Views 9 Replies 9 Participants Last post by  zarko
Finally got around to finish one of my slotcar project.

I have a section of my permanent track where i have a chicane followed by an S-curve. At the moment it is all done with R2 tracks.
I wanted to make the section more fun and realistic to drive through. I desided to incorporate 3 SLC track section as you can see from
the pictures.

As there is no straight section i needed to fit 2 sensor pieces, the first one at the end of the first SLC

The second sensor piece is placed at the end of an R2 track

As you can also see all the flippers got the "power to the flipper" mod which is done with relays.

I did not fit any additional sensors besides the sensor track piece, but i will use the new section in my permanent track and
see how many cars actually will miss the sensors.

Hope it can give some new inspiration to track layouts

See less See more
1 - 1 of 10 Posts
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.