SlotForum banner

Slot.It Controllers

2K views 3 replies 3 participants last post by  miveson 
#1 ·
I'm looking for a bit of advice about the slot.it controller.

I've decided to give Oxigen a go and have ordered all of the relevant components and I'm curious about the slot.it controllers.

The real question I have is can I buy a standard slot.it hand controller SCP01f and simply swap cartridges based on what I need?

Ideally I'd like to use the controller for the following applications:

1. Scalextric SSD C7042
2. Pure Oxigen
3. Club racing (analog positively wired)

Seeing as I'm going to Oxigen which has it's own unique cartridge the biggest outlay is the bare bones hand controller. It would be nice to be able to swap the cartridge over depending on what I'm doing and where I'm racing.

I hope that makes sense - Any help would be much appreciated.
 
#2 ·
It would probably make sense to buy the controller with one of the cartridges you need, e.g. digital, and then buy the other two cartridges separately. This will be cheaper than buying the bare controller and three separate cartridges.

And yes, the idea is to have one handset that you just swap cartridges into depending on your needs at the time.

Stuart.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top