[diesel]

Looking at the way Slotman uses Radii I think all the curved track is expected to nest, as they do with Tomy where the hairpin fits snugly inside the 6", the 6" inside the 9" etc. The Micro Scalextric hairpin doesn't fit this formula, so I don't think you'll have much luck defining a hairpin and 9" bend in the same track system.

Can you create a second track system solely for the hairpin, as I think you can combine different track (so long as the lane separation matches) in a single layout? So the 9" bend would be radius be radius 1 in Micro Scalextric and the hairpin radius 1 in Micro Scalextric2?

Once you've sorted that try the Micro Scalextric obstacle track

I have to admit to using Ultimate Racer, where I have both hairpin and obstacle working

 

[diesel]

QUOTE (KevinHa @ 22 Apr 2010, 18:24) <{POST_SNAPBACK}>So disappointed that the official Scalextric track designer doesn't support Micro

There's plenty that do. Ultimate Racer is free, supports MS for one.

I'm forty and manage to get the cars off the floor. Although the kids have to get their own if they crash

 

[diesel]

These are the odd bits of track I've done.

The obstacle is awkward, so is a bit rough round the edges but works.

The hairpin isn't 100% accurate, as the lanes close up, but the overall dimensions are ok so it's good enough for layout designing.

Crossover:

[15" Crossover]
Name=15" Crossover
Notes=
Shape=cross,7.6,38.1,15.3,15.3
Equivalent=
OneWay=
Lane1=17.2,-15.3,17.2,22.8
Lane2=21.0,-15.3,21.0,22.8
Lane3=0.0,1.9,38.1,1.9
Lane4=0.0,5.7,38.1,5.7

Obstacle:

[15" Obstacle]
Name=15" Straight
Notes=
Shape=(0,7.7)(9,7.7)(10,7.6)(11,7.4)(12,7)(13,6)(14,4.4)(15,3.3)(16,2.4)(17,1.7)
(18,1.1)(19,0.7)(20,0.4)(21,0.2)(22,0.1)(22.9,0)(22.9,3.9)(22,4)(21,4.3)(20,4.7)(
19,5.4)(18,6.3)(17,7.6)(16,11.1)(16,11.9)(17,15.4)(18,16.7)(19,17.6)(20,18.3)(21,
18.7)(22,19)(22.9,19.1)(22.9,23)(22,22.9)(21,22.8)(20,22.6)(19,22.3)(18,21.9)(17,
21.3)(16,20.6)(15,19.7)(14,18.6)(13,17)(12,16)(11,15.6)(10,15.4)(9,15.3)(0,15.3)
Equivalent=
OneWay=
Lane1=0,1.9,9,1.9,10,1.8,11,1.7,12,1.4,13,1,14,.3,15,-1,16,-2.5,17,-3.4,18,-4,19,-4.7,20,-5.2,21,-5.5,22,-5.7,22.9,-5.8
Lane2=0,5.7,9,5.7,10,5.8,11,5.9,12,6.2,13,6.6,14,7.3,15,8.6,16,10.1,17,11,18,11.
6,19,12.3,20,12.8,21,13.1,22,13.3,22.9,13.4

Hairpin:

[Hair pin]
Name=Hair pin
Notes=
Shape=hairpin,23,28
Equivalent=
OneWay=
Lane1=1.9,1.9
Lane2=5.7,5.7