SlotForum banner
1 - 2 of 2 Posts

·
Banned
Joined
·
99 Posts
Discussion Starter · #1 ·
Hi Graeme, Michael and all at GT Raceways.
Can you give us a little advice please. As you know we are moving our track to a new venue. We have noted that some of our 'NINCO' track is showing signs of very slight rust since being placed in the unit. How do you guys maintain your track within your unit? Do you for example use WD40 or equivalent in your maintenance? Clearly we are not running anything at present as the track is not completed, but our track, the same as yours is being placed in a similar environment to yours. Our unit is unlikely to be heated to any extent in the winter months although the pit area outside will have the luxury of heating. Any advice would be appreciated from your knowledge.
Lisa x x ("Troll" who fell in love with "Twig")
East Durham Slot Car Club
 

·
Registered
Joined
·
2,036 Posts
Hi Lisa


Hope you are keeping well

As far as I know All graham cleans it with is an occasional rub over the rails with a rag and some meths or white spirit

I know for our Digi track we use INOX and that gives a great effect for continuity all we do is a few drops on the braid then run the cars round and just keep reapplying it for a while

Michael
 
1 - 2 of 2 Posts
Top