SlotForum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
232 Posts
Hmmmm - sorry boys but i have to disagree with you

I do not think u need a large to track to make this work. With the track set up at Pendle - there was not enuf crossovers, just one per lap to switch inside to outside lane (or vice-versa) I think on a smaller home track - about set 4 size, 2 crossovers would be fine. U can get what - a 5-7 second lap on a home track - how many crossovers do you need in that time? It takes your brain a little while to think - i want to change lanes - need to press button (before the curve so that the sensor registers). You cannot press and change whilst actually on the curve, as the sensor track section is directly before the curve.

Also - I liked the corner crossovers. You have to slow and judge the crossover, as the radius of the curve gets tighter if you cross lanes. I think a cross-over on a straight however would not flow properly with the track, and would cut-up an otherwise nice long straight. The crossover can be a max of a standard straight length - thats gonna wiggle


Lv Hugs x x x
 
1 - 1 of 1 Posts
Top