[mikefi]

APB.firm1.07...SSDC.5.3.0.0 all correct leads

Just taken pit pro out of action due to fussy sensor in PLG..(I think).Although pit lane base is still in track...just flashed APB and downloaded new version of SSDC

My pit lane does not straddle the APB or anywhere near it..Its about a third away around circuit...

Both options in SSDC for no pit lane monitor .Have changed comm port to NONE
1, before start line...after refueling..car crawls around track at pit lane limited speed untill it reaches APB then is released
2, after start line.....after refueling car collects another lap and a very long lap time followed by a super quick time beating track min lap as it passes APB

What setting have I missed out?????

Can one of you more savvy techies help me out please

Cheers mikefi

 

[mikefi]

P.S. I am loving those non linear throttles superb.....thanks Mr wallace

 

[mikefi]

O.K. Just gone back a version of firmware and back a version of SSDC...I.E...firm1.06 and SSDC ver.5.2.1.0

Now all working great.... No pit monitor exit after start, after refueling it releases car and does NOT record a mega lap followed by a very fast i.e.one of two thirds of my circuit

Is this what they call a bug???

Happy bunny again

 

[Ade]

hi
probably best to post it on ssdc website so Andy can investigate...

 

[awallace]

problem is that you have a setup which SSDC doesn't understand

Exit before start means that SSDC uses the start/finish as the exit sensor, so it is best if the exit is near the start/finish otherwise you crawl for a while
Exit after start means that you exit the pits as soon as you start rolling and then record an extra lap, which in your case doesn't work either
I think that the best option is for me to add one more type which will be exit before start, but dont use start as exit sensor! or perhaps I simply repurpose the setting that is there.
Thoughts anyone?

 

[Ade]

hi
yes Andy, tell them to be not so mean and get a pitpro.

 

[zarko]

Andy - surelly the easiest option is just to have an option to enable/disable pit lane speed limit and then depending on your setup, you will have it on or off.

 

[Racers BBQ]

I have the same type of pitlane configuration as mikefi. An option to recognize pit lane exit when throttling after refueling would be great. For the time being I just set pit lane speed to 100% to avoid crawling around the remaining lap.

I'm very new to the software - just received my riko cable yesterday so will probably have many questions and trying not to start unnecessary new threads. One question I have not been able to find an answer for would be the Pit Lane min and max values in the Track configuration. Is this to keep pace cars from entering pit lane? I do not want my pace cars changing lanes in the first 1.5 secs after crossing the powerbase line, should I set this in the min or max field?

 

[awallace]

The min and max values are min and max times to the pit entrance from the the start/finish. Lane changing for pace cars is disabled between these times. So in your case, set the min=0 and max=1.5.