SlotForum banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
1,294 Posts
Discussion Starter · #1 ·
Hi Guys
had another race night last night and having trouble with track call only now Ive up graded.
have it set up at 0.5 seconds zero throttle.
and to stop cars so as not to have pile ups but it does not stop the cars must cars seem to do another half lap on a 9/10 lap track????
any one have the same problem?
regards ade.
 

·
Premium Member
Joined
·
1,294 Posts
Discussion Starter · #3 ·
Hi
It was alright until I upgraded and I have calibrated the controllers plus it is with all racers not just one.
cheers ade.
 

·
Living the Life!
Joined
·
11,082 Posts
What are your settings for Track Calls, Car Speed Limit and the Driver's Start Speed?
 

·
Premium Member
Joined
·
1,294 Posts
Discussion Starter · #5 ·
Hi Greg
car speed around 40 on must cars lmp need 60 because they dont work well in pit lane
drivers power is set at 100 if that is what you mean ?
ade.
 

·
Living the Life!
Joined
·
11,082 Posts
Yes, they seem fine. There is another option for the Track Call and that is i) - stop on track call or ii) Slow running on track call. What is yours set to?

Do you have Dynamic braking set OFF?
 

·
Premium Member
Joined
·
1,294 Posts
Discussion Starter · #7 ·
Hi Greg
I have it set on stop on track call.
and dynamic brakes on.
as it was set before I upgraded and it worked fine then shirley Iam not the only one with this problem.
ade.
 

·
Living the Life!
Joined
·
11,082 Posts
Ade ...... have a look at this post on the SSDC topic.

There seems to some parallels ........
 

·
Premium Member
Joined
·
1,294 Posts
Discussion Starter · #9 ·
Hi Greg
Yes have been reading this topic.
and I use dynamic braking so it should work what I will do is go back to the older SSDC and see if it still ok.
cheers ade.
 

·
Registered
Joined
·
26 Posts
Hi Ade

If your using dynamic brakes you could always change the brake button on the controller to do the track call.

Fox
 
1 - 10 of 10 Posts
Top