SlotForum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
243 Posts
Well the paint went on, and I found the best finish was to give the board a good coat with a brush, and then wipe off the excess paint with a rag. The surface has then a very smooth finish, but the colour is dense enough to not allow the board base colour to show through. I had to touch up the areas where the epoxy glue is at surface level, as the paint wasn't covering these parts well. I then masked off the 'road', and sprayed the remaining areas with car primer. The intention is to add white and red borders and logos as well. Finishing the wiring is tonights task, and when I've got it working, it will be another entry in this blog!

More pictures in the gallery...

gallery_1347_502_110816.jpg
 
1 - 1 of 1 Posts
Top