SlotForum banner
1 - 5 of 5 Posts

·
Allan Wakefield
Joined
·
5,857 Posts
Discussion Starter · #1 ·
Ok, you know the old quandry...

You ONLY have 300 cars but there is ONE MORE YOU REALLY NEED and YOU NEED to true the tyres on them all so you REALLY NEED a tyre truer.....

You ALL been there right?

Ok..You can go TOP END - BIG BUCKS (loads of cars worth ) all singing all dancing tyre truer with attached performance software and motor analyser *...

You can go a little less top end but still a few cars worth HUDY jobbie...

You can go Lower end, maybe two or three cars worth of Quality German ReifenschleifMaschine ( probably spelt wrong and lost the Internet site for now.. more on it later
)

OR !!

Thanks to the wonders of Swiss' technology and willingess to adapt if it saves a couple of francs.......

You can build one of these. Actually I jest above for effect but I am serious when I say this is a wonderful idea and it works well...





It sits on top of your track, either way round but experience shows me truing tyres in reverse works best.
Apply Power, hold car on plate, lower tyres and true away!

Wood by - well anyone in the wood business I guess,
Nails and Staples and Glue by 'Useful bits for the great unwashed Inc'
Braid by Ninco in this case.

* = Kelvin Light Test Bench..damn fine machine...
 

·
Allan Wakefield
Joined
·
5,857 Posts
Discussion Starter · #15 ·


What was that you were saying about MALE testosterone Thomas?
 

·
Allan Wakefield
Joined
·
5,857 Posts
Discussion Starter · #24 ·
I would be interested in that one too thomas


I use it all the time on both plastic AND routed tracks and not had a problem.
 

·
Allan Wakefield
Joined
·
5,857 Posts
Discussion Starter · #27 ·
In defence of the RSM I have found it very user friendly and not at all fragile in use.
You can order extra sanding plates so each person can have their own as well.

GI JOE: send them an email from the site, they speak English fine and will answer any questions fast and efficiently.
 

·
Allan Wakefield
Joined
·
5,857 Posts
Discussion Starter · #30 ·
GI JOE - 9 months???

Ok here is the contact details for you all and a list of outlets (90% in Germany though)

balke & feistkorn GBR
- Produkte für die Autorennbahn -
Goethestr. 13
48734 Reken
Telefon: +49 (0)2864 5928

Holger Balke, Goethestr. 13, 48734 Reken
Ingo Feistkorn, Amtsstr. 13, 67059 Ludwigshafen

[email protected]

USt-Id: DE224790366

Patentnr: 10152873 DPMA

Wir haben kein Ladengeschäft! Persönliche Kontaktaufnahme bitte zunächst über Email oder Telefon. Danke!
(We do not have a retail outlet. For personal contact please use email or the telephone. Thanks)

Outlets:

# Caracho Modellrennbahn Center, 45659 Recklinghausen

# Overdrive-Slotserviceoverdrive-slotservice, 51379 Leverkusen

# Slotfire, 50937 Köln

# Slotfun, 61273 Wehrheim

# myslotcar, 27616 Lunestedt

# kaufschlau, 32547 Bad Oeynhausen

Netherlands:
# slotracershardware, 5684LW Best (NL)
 
1 - 5 of 5 Posts
Top