SlotForum banner

Using Oxigen RMS to create a (motor) B.o.P

3225 Views 67 Replies 11 Participants Last post by  GRUNZ
As per version 8.3 the DiSCA GT3 tech rules allows race organizers to choose a spec motor for their events from the following 3 options.
1 Scaleauto SC-0027B Sprinter Junior rated at 18.000rpm
2 NSR 3024 Baby King rated at 17.000rpm
3 Sideways Baby Raptor rated at 17.000rpm

A new "local " Belgium/Dutch DiSCA GT3 spin off would like to use both the NSR Baby King and the Sideways Baby Raptor simultaneously in their series, assuming that since both motors were equal as both are advertised as 17K motors.
But preliminary testing indicated that some motors were more equal than others.

This topic will report on the tests and quest to see if the Oxigen RMS can be used as a tool to create a B.o.P (Balance of Performance) between different Motors.

Some post on this topic have been made in recent days. I will (re)post them here as Quotes.

With kind regards
Tamar
  • Like
Reactions: 2
1 - 1 of 68 Posts
I wonder if I will ever see the day when Power ([watt]) value is used in place of RPM, when discussing slot car rules set...
I know I won't. Therefore, in the light of the future electrification, when I will buy my next car, I will shop around for the one with the most RPM available. Makes sense... :confused:
  • Like
Reactions: 1
1 - 1 of 68 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top