SlotForum banner
1 - 2 of 2 Posts

·
Tore
Joined
·
1,861 Posts
These are SH-030 motors and comes in all kind of RPM ranges, just like any other slotcar motor.

Not sure about the RPM of the Scalextric Micro motors, but the Ninco 1/32 go-cart motor is about 14-15.000 RPM at 12 volt and the Pink Kar Beetle motor about 20.000 at 12 V. Torque is probably around 30 gcm , which is about half of a NC-1 and similar to SCX/Carrera 1/43 motors.

Would be fun to test the specs of the Scalex Micro motors, if they are somewhere between 15.000 - 25.000 RPM they should be usable for small lightweight cars since the motor only weights about half of regular 1/32 motors. The motor shaft is the same diameter as the slim-cans (1.5 mm) so pinions are available from Scalextric, Scaleauto, etc..
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top