[abie321]

Is anyone else out there like me??

I tend to do cars in batches, and even when doing in batches I tend to build basic body of a few cars at a time, then paint them, then decal them and then detail paint them, so I eventually land up with quite a few at different stages of completion.......

This is what I have on my bench at the moment........

what is on yours.....???

 

[JcRacer43]

I'm afraid it would be an ambarresment to show mine. ( I like your detailing)

 

[Slotrace.dk]

Done Freisinger Porsche 911 from Le Mans 2001.
I just finished Audi R8 no.7 from LM 2000.
Just painted Dome S101 white to make Den Bla Avis from LM 2001.
Need new decals for Hydro Aluminium Porsche 962 from LM 1989.
Ready to paint Porsche 917K for the no. 18 LM 1970.
Need to paint Mercedes CLK from LM 1998.

That's about it!

 

[abie321]

Rene

Would love to see your Freisinger Porsche and Dome - 2001 is the first year I was privaledged to see Le Mans, and am in process of trying to convert and build all the cars from that race...... have those decals and cars but not yet taken them out to do yet.......

 

[Slotrace.dk]

Take a look here for the Freisinger:
http://www.slotrace.dk/DreamHC/Side5.html
and here:
http://www.slotrace.dk/Tips&Tricks/DreamHC/Side13.html

In Danish I'm afraid, but you get the idea!
The teeth wasn't long enough to reach behind the front wheels.
Really pissed me off!

Audi R8:
http://www.slotrace.dk/Reportager/DreamHC/Side15.html

Not ready with the Dome yet.

 

[howmet tx]

All I can say is that you are a man pf immense taste and discrimination, Abie!
That lot would do for me. Beautiful choice.
On the go chez Howmet is;
Two Indy Paxton Turbines
Lotus 23
Two Howmet TXs
McLaren M1B 'Pacesetter Homes'
Plus all last year's junk which needs upgrading....

 

[abie321]

Rene: awesome - why your interest in LM 2001?

In my bench (a little down in the list

are 3 Audis to redo in the correct detail....

Howmet - thanks - but in reality it is merely showing my age

come on - share some pics!!
I would love to do a Howmet - if I could get a body.........

 

[howmet tx]

I can send you one Abie. I've got loads of spares. Drop me a line with your address-
But it looks as if you're pretty busy just now!

 

[Scott B]

What's a bench?

 

[E-racing]

On my bench , a lot of projects, but slowly it seems i'm getting somewhere:
-for the small car proxy: a fiat 500 and a fiat 600,
-for the can-am proxy: alfa romeo T33/3,
-1930 alfa romeo 6c2300 (airfix kit conversion),
-alfa romeo TZ (protoslotkit body)
-alfa romeo 33/3( scalextrix body upgrade)
bodies in stock, not yet started: two '80 F1, Duetto, scalextrix BRM and a matra 630. Tonight i will try to get them together for a picture

 

[andre acker]

I am new here and I want to congratulate all of you for the very beautiful work.
You will have to forgive me for my poor English ...
Are those formula bodies on your bench from Classic ?

 

[MAF]

I have too many projects on the go to fit on the table at the same time

but here's some that may get finished soon...

they are a lola GT (my own casting, more to come on this), a top slot Maserati, a Pink Kar GTO relivery (not started yet), a Protoslot 908LH, and my Bentley.

Regards, Marlon.

 

[BEEJAY7]

Hi Anthony...

I've got one or two projects tucked away on the bench...........

Topslot Maserati 152 almost finished, Fibreglass Maserati 154 Prototype half complete.

Resilient Resin Honker, King Cobra, Lotus 19 started.

2 pin cars for Jeff Davies, (one is the sister car to JP's fabulous Merc).

2 World Proxy Can-Ams....One Brass, one PCB 60's throwback...

AA Bodies C type Jaguar, Matchbox Merc SSLK and Porsche 917-10 (Might be a Proxy shell)

Cox Cheetah to restore....If I can prise the bits from Doc P..

A new engine to install in my 1:1 Healey, (Well it is on the bench!)
&
New routed track to build.

This should keep me going till the end of March.....

Regards

Alan

 

[howmet tx]

I look forward to news of your Lola, Marlon- just done one of those myself! Beautiful car. With the prototype done, I intend to go back and add all the wide wheel arches for the Mecom version and cast that too.

 

[dhmotorsport]

Still working on turning the T400R into a Tuscan Challenge car. Have been a bit busy with business so it's taken a temporary back seat but I'll be back on it soon.

 

[minimental]

well on my bench are mainly tools, but there is currently a monster truck a jousting knight and a second one waiting for conversion there are also a couple of my land rover bodies awaiting conversion + a prorace clk being rebuilt plus in my development corner there is a twin motored mercedes clk ditm and my parma motored proslot toyota being repaired
probably set myself to much to do at the moment
Reuben

 

[Ghost]

Three different pieces of track-to-be there is on my bench right now.
1) An upslope for my own Red Pine Sport, with an open S at the top.
2) A fourlane crossover, to be offered to the community here.
3) Two big and long hump back bridges, also for the community here.

That's about it, as it is.

/Erik

 

[David Lawson]

A very nice selection you have on the bench Anthony.

I'm currently working on a Lotus 43, Mini Cooper, Aston Martin DBR1 & Lotus 11 for the Pre 63 Le Mans, Lotus 72, Cooper-BRM T86, Howmet, a pin guide Mercedes for the Walkden Fisher, 4 Pre Ad 1950s F1's, a 1/32 and a 1/24 car for Bordeaux, Morris Minor Convertible, E-type Jaguar with Pendle Chassis and about another 20 cars at an early or in the planning stage.

David

 

[howmet tx]

Fun, ain't it?

 

[The Stickman]

Ok here goes. I am making a VW bus that will have fender flares and a front spliter and rear wing. It will also have a rear facing camera. It will ride on a fly Lancia Beta chassis witha Slot-it V-12 motor.

I am also converting a old Scalextric Ford RS200 to a Scalextric sport Subaru chassis witha V-12 engine.

I have a Lister Corvette resin body that I want to do in the colors Jim Hall ran before he made his Chaparrals famous. BTW he ran a Lantham supercharged Chevy engine.

I am making a Chaparral 2H running on a Fly Ferrari 512S chassis.

I am also trying to make molds of the 2 and 2D, as well as the 2H. I will also be trying to do a Mclaren M16 Indycar as well as an AAR Eagle of the same vintage.

BTW anyone have a grill for an Eldon Chevy impalla?