SlotForum banner

What's wrong with my Challenger??

1298 Views 12 Replies 11 Participants Last post by  Tropi
Hi guys, I don't know if there's something wrong with the Challenger and would like some advice. I tried to run it on a Carrera track for the first time last night and had everthing set up properly. After the car had learn the track for two laps, it came back and stopped at where the magnet is, as it always does and supposedly ready to race.

The problem is that it doesn't matter whatever button I press, ie. fast or slow, the car would just deslot big time in the first corner. I've also tried switching between classic and sport on the car itself but had the same result. I used to run the challenger on a Scaley sport track and only had problems with it when it comes to R1 hairpins.

The Carrea track is contructed from only standard straights and 1/60 degree curves, so nothing tricky really. The start/finish is on the long straight.
The challenger is standard without mods and I made sure the tyres and the track were clean.
Any ideas??

Many thanks!!
See less See more
1 - 1 of 13 Posts
Peter
QUOTE I was under the impression that Scalextric normally are rather swift when trouble arises.
They normally are swift and efficient so it sounds as though communication has failed somewhere. I would suggest that you contact Scalextric and enquire as to the situation. It is possible that they have not received the returned car. Definitely worth checking, before too much time passes. I am quite sure that good old Scalextric will do their level best to sort things out.
See less See more
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top