[pwedders]

Hi, can anybody advise on which slot.it tyres fit the large hubs that come with their axle kit SIKK07?

The kit is fitted to a Scalextric TVR T400R which will be used on scalextric sport track if that helps.

Thanks in advance.

 

[Guest]

20 x 10's or 20 x 11's will fit although the 10's are used generally for the 15 x 8 hubs and will be a snugger fit.
The hubs you have are 17 x 10.

 

[slotcrazy]

Hi pwedders, the attached link is a useful spreadsheet for you to align any Slot.it hubs with the tyres which will fit it.
In addition, smaller diameter S1 and S2 19 x 10 tyres CAN be stretch fitted to those larger hubs for a nice tight fit if you use silicons, and are not in the habit of gluing tyres to hubs.

Slot.it wheel and tyre chart - PDF 111kb

 

[brembo]

The new Slot.It C1 compounds are designed to run on Scaly track.
Part nos are SIPT35 for the 20x9.5 & SIPT33 for the 20.5 x 10.5 both are designed for the 17mm wheels that you have.
I would avoid silicons unless your track is in a VERY clean enviroment they are great when the track is clean but very frustrating if it is not!
Cheers
Brembo

 

[pwedders]

Thanks for all the help. I did look at the slot.it tyre wheel cross reference before posting but couldn't make head nor tail of it. Problem is there's too much choice

The supplier sites that I've been looking list PT24 and PT25 as suitable for scalextric sport. Does this refer to the hub or track?