SlotForum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I have been reading around and have noticed that alot of you buy custom motors. I was wondering if any of you wind your own motors. I was recently into xmods/miniz and i wound my own motors. You can make very high performance motors for low costs. If any of you are interested in learning i would provide you great link and info on torque and geting better speeds and some excellent combonations.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #5 ·
Great site russel www.carmoworld.com this is a site with basic winding tips and also cheap motor parts. This isn't a slot car site but if you have a motor that has the pinion at the ende of the can you could use these parts. Not the end of the brushes, but if it is driven at the end of the brushes you could still use the magnets and brushes and such. Cool scientist don't worry about if your hands shake when you concentrate just try not to really focus in on one particular thing. Try watching tv and winding the motor. Just make sure you keep track of you winds. And when your rewinding the motor just remember that you cand do anything you set your mind to. That may have sounded a little corny but it's true good luck
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top