[dutchdog]

I believe ninco released wireless controllers this year.

Can I use wireless oxygen controllers if there are any?

I want to upgrade controllers with oxygen in mind later.
I believe on can change cardridges and such.

Can someone guide me in the best buying path and can I use these controllers also for analog at 1 go by swopping cardridges or so?

 

[MrFlippant]

I believe the NINCO wireless controllers are analog only.

 

[dutchdog]

That's right.

I am looking at the slot.it controllers, the transparant ones with removable cardridge.
Are those wired or wireless. They cost a pretty penny though..

As these ones can be used for oxygen I believe..

 

[mfogg]

The Slot.it SCP01-D is compatible with N-Digital. There is also a SCP01-D (3v3) which is only for Scalextric C7042 APB and SCX Digital. To my knowledge there is no wireless version of the SCP01-D.

_michael

 

[MrFlippant]

When slot.it make the Cartridge Radio Interface (CRI), then the SCP01 will be wireless capable with any system. You would need a complete SCP01 (d, in this case for Ninco Digital), plus an oXigen SCP cartridge, and finally the CRI. The SCP becomes an oxigen controller, and the original digital cartridge plugs into the CRI to be controlled by the SCP wirelessly. It's a neat system that allows their controller to work wirelessly on any system, analog or digital, but it's not inexpensive. I don't even know what the CRI will cost.