SlotForum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter · #1 ·
What is the wheelbase of Parma a 1/32 Womp Womp chassis and are there any bodies available that can be made to fit that aren't the classic undetailed styrene?
 

·
re member
Joined
·
4,024 Posts
Hi Mike,
I'm not exactly sure on the wheelbase but there should be plenty of 2.5 inch wide bodies with some scale appearance around for the womp and the International 32 chassis.

Betta bodies might be a place to start.

http://www.bettaandclassic.com/

cheers
munter
 

·
Registered
Joined
·
3,570 Posts
Parma still make Womp Womp chassis and bodies.

The Womp Womp bodies are mostly around 2 3/4 inches wide.
The chassis is just under 2 1/2 inches wide and pretty much the same as the "Home Set" chassis
"Home Set" bodies are 2 1/2 inches wide.

The current Womp Womp has two sets of front axle holes, so you can choose two different wheelbases about 3 inches and about 3 1/3inches
 

·
Registered
Joined
·
38 Posts
Parma products are imported into the UK by Slot Car Distributors (SCD). Can't do the link thing but Google should find him.

HB
 
1 - 8 of 8 Posts
Top